38" Traditional Panel
Here's how it works. The steel is run through a bath of molten zinc. The zinc chemically bonds to the steel, so there's a layer of zinc between the steel and the air. Before the steel can rust, the zinc "sacrifices" itself, slowly oxidizing while protecting the steel. The result? A panel that can stand up to the elements over the long haul.
But that's only the first part of Traditional Panel's four-step protection against rust. Our zinc phosphate coating prepares the galvanized surface for adhesion of the primer and provides additional protection against rust.
Next, we apply a unique two-part coating, a primer point and then a siliconized polyester finish coating to provide a rich, durable surface color and additional protection. More than just a layer of point, this cooling is actually on oven-cured system of four separate coatings, each of which contributes to the overall strength and durability of the panel.
- ENERGY STAR qualified roof products reflect more of the sun's rays. This can lower roof surface temperatures, decreasing the amount of heat transferred into a building.
- ENERGY STAR qualified roof products can help reduce the amount of air conditioning needed in buildings, and can reduce peak cooling demand by 10-15 percent.
Now, warranties aren't unique. But the way we bock ours is. Every sheet of Traditional Panel is "signed" with on I.D. number on the bock visible with a block light. That's proof that we take quality seriously and intend to honor the warranty. That's confidence.
How long is a building good for? As long as it keeps standing and does the job you built it to do. So the more a building can stand up to, the better the building, and the more value you get for your money.
A Traditional Panel building is as good as it gets in steel panel buildings. It's thicker. It's stronger. It resists rust better. It comes with a 40-year warranty on the point and a 10-year warranty against acid rain. And it provides you with more value for your dollar.
Specifications
| Model | 38" Traditional Panel |
| Overall Width | 38 in |
| Cover Width | 36 in |
| Side Lap | 2 in |
| Main Rib Height | 11/16 in |
| Main Rib Spacing | 9 in center to center |
| Thickness | 29 gauge |
| Nominal Galvanized Steel Thickness | 0.015 in |
| Nominal Color Coated Steel Thickness | 0.0165 in |
| Moment of Inertia |
0.00901 in. 4 ft width, negative bending |
| Section of Modulus |
0.01680 in. 3 ft width, negative bending 0.01762 in. 3 ft width, positive bending |
| Allowable Stress | 48000 psi |
| Minimum Yield Point | 90000 psi |
| Minimum Tensile Strength | 92000psi |
| Color | Multiple options available |
| Note | The colors are intended only as an approximation of the actual colors. Color chips are available upon request. |
| Paint Specifications |
We choose Valspar Weather X siliconized polyester paint for our panels as it is recognized in the industry for its remarkable color and gloss retention as well as its superior chalk resistance. All Weather X painted HW Brand roofing and siding panels are covered by our forty-year paint warranty. |
PDF Downloads
Traditional Panel & Universal Panel
